Monday, April 11, 2011

how to install a starter motor on diesel v8 land cruiser toyota


Removal & Installation



Click on this image below for exact starter installation and removal procedure.
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Drain the cooling system.
  3. Relieve the fuel system pressure.
  4. Remove or disconnect the following:

    Negative battery cable
    Engine appearance cover
    Air intake tube
    Intake manifold
    Starter motor mounting bolts
    Starter wiring connectors
    Starter motor


    Click image to see an enlarged view

    Fig. Starter removal-Land Cruiser


To install:

  1. Install or connect the following:

    Starter motor
    Starter wiring connectors. Tighten the cable nut to 86 inch lbs. (10 Nm).
    Starter motor mounting bolts. Tighten the bolts to 29 ft. lbs. (39 Nm).
    Intake manifold
    Air intake tube
    Engine appearance cover
    Negative battery cable

  2. Fill the cooling system.
  3. Start the engine and check for leaks.

  1. Before servicing the vehicle, refer to the Precautions section.
  2. Drain the cooling system.
  3. Relieve the fuel system pressure.
  4. Remove or disconnect the following:

    Negative battery cable
    Engine appearance cover
    Air intake tube
    Intake manifold
    Starter motor mounting bolts
    Starter wiring connectors
    Starter motor


  1. Click image to see an enlarged view

    Fig. Starter removal-Land Cruiser



To install:

  1. Install or connect the following:

    Starter motor
    Starter wiring connectors. Tighten the cable nut to 86 inch lbs. (10 Nm).
    Starter motor mounting bolts. Tighten the bolts to 29 ft. lbs. (39 Nm).
    Intake manifold
    Air intake tube
    Engine appearance cover
    Negative battery cable

  2. Fill the cooling system.
  3. Start the engine and check for leaks.

If the picture is very small to see, please click the enlarge option on left side.

max