Sunday, June 19, 2011

Hayward S166T high-rate sand filter instructions?

The filter should be placed on a level concrete slab, very firm ground, or equivalent as recommended by your pool dealer. Position the filter so that the piping
connections, control valve and winter drain are convenient and accessible for operation, servicing
and winterizing. Your filter is supplied complete with an optional pump mounting base which is pre-drilled for use withHayward Power-Flo LX series pumps. The pump to filter connecting hoses supplied will accommodate Power-Flo LX pumps used with the mounting base,
and Max-Flo or Super Pump installed at surface level. To connect pump to filter:Screw straight adapter, using Teflon pipe sealant tape or Permatex No. 2, securely into pump discharge. (Do not overtighten.) Screw elbow adapter, using Teflon pipe sealant tape or Permatex No. 2, securely into opening in control valve marked PUMP. (Do not overtighten.)
Elbow should point just over RETURN opening.
-------------------
Click this link below for how to use the Hayward S166T high-rate sand filter:---