Monday, June 6, 2011

Testing Brake/Clutch Pedal Switch on john Deere?

Testing Brake/Clutch Pedal Switch (For Units With Manual Transmission)

1. Park machine safely. (See Parking Safely in the Safety section.)

2. Sit on seat.



3. Push brake/clutch pedal (A) down.

4. Pull mower engagement lever (B) back to disengage.

5. Put transmission in N (neutral).

6. Start engine and move throttle lever to fast speed position.

7. Release brake/clutch pedal (A) slowly.

8. Raise up off of seat, but do not get off tractor.

Result: Engine will begin to stop. If engine does not begin to stop, there is a problem with your safety interlock circuit.

-----------------

Testing Brake Pedal Switch (For Units With Automatic Transmission)

1. Sit on seat.

2. Push brake pedal down.


CONSOLE

3. Pull mower engagement lever (A) back to disengage.

4. Start engine and move throttle lever (B) to fast speed position.

5. Release brake pedal slowly.

6. Raise up off of seat, but do not get off tractor.

Result: Engine will begin to stop. If engine does not begin to stop, there is a problem with your safety interlock circuit.

------------

max