Friday, October 7, 2011

How to replace clutch MATER cylinder on 1999 Saturn SL2?

PLEASE HELP.
I NEED TO REPLACE MASTER CYLINDER ON MY SATURN SL2.
I NED INSTRUCTIONS PLUS DIAGRAM.
CAN YOU PROVIDE?
------------
OK.
Yes sure.

Master Cylinder



Removal & Installation



  1. Clean the brake fluid reservoir cap and area around the cap.
  2. Remove the brake fluid reservoir cap and remove enough brake fluid to clear the passage to the clutch master cylinder.

    Click image to see an enlarged view
    Fig. Remove the clutch hydraulic line assembly from the clutch master cylinder
  3. Disconnect the clutch hydraulic line assembly from the body retaining clips.
  4. Remove the clutch hydraulic line assembly from the clutch master cylinder.
  5. Position the line out of the way of the clutch master cylinder removal path.

    Click image to see an enlarged view
    Fig. Remove the clutch master cylinder hose from the brake master cylinder
  6. Remove the clutch master cylinder hose from the brake master cylinder.
  7. Remove the left lower I/P closeout panel (hush panel) push pins and remove the left lower I/P closeout (hush panel).

    Click image to see an enlarged view
    Fig. Remove the clutch master cylinder push rod from the clutch pedal
  8. Remove the clutch master cylinder push rod from the clutch pedal.
  9. Remove the clutch master cylinder mounting nuts and remove the master cylinder.
To install:
  1. Transfer the clutch master cylinder hose to the new clutch master cylinder.
  2. Install the clutch master cylinder and mounting nuts, tighten the clutch master cylinder mounting nuts to 15 ft. lbs. (20 Nm).
  3. Connect the clutch master cylinder rod to the clutch pedal.
  4. Install the left lower I/P closeout panel (hush panel).
  5. Install the clutch master cylinder hose to the brake master cylinder.
  6. Attach the clutch hydraulic line assembly to the clutch master cylinder.
  7. Connect the hydraulic line assembly to body retaining clips.
  8. Add brake fluid as required and bleed the clutch hydraulic system.
  9. Inspect the system for proper operation and fluid leaks. Repair as necessary.

NOTE
The clutch master and actuator cylinder assembly is to be serviced as a complete unit. It is a sealed unit and has been filled with fluid and bled of air at the factory. Individual components of the system are not available for service, except the slave cylinder actuator pushrod plastic retainer strap

  1. Block clutch pedal up to prevent pedal from being depressed with slave cylinder removed from transaxle.

    Click image to see an enlarged view
    Fig. Remove the air cleaner and duct assembly
  2. Remove the air cleaner and duct assembly.
  3. Disconnect the negative battery cable from battery.
  4. Disconnect the positive battery cable from battery.
  5. Remove the hold-down retaining nut and screws, and lift off battery hold-down retainer.
  6. Lift the battery out of the vehicle, and place it in a safe location.
    NOTE
     The PCM J. (black 80-way) harness connector does not need to be disconnected.
  7. Disconnect the PCM J2 (black 28-way harness connector by moving the locking device outward toward the fender
  8. Remove the PCM Attachment bolts and move the PCM out of the way.
  9. Remove the battery tray and bolts. One bolt is located in the fender well
    NOTE
    Prior to removing the slave cylinder from the clutch hosing, make sure that the clutch hydraulic system has sufficient fluid.
  10. Rotate the actuator quarter turn counterclockwise while pushing toward housing in order to disengage the bayonet connector and remove from clutch housing.
  11. Remove the two hydraulic damper to clutch housing nuts and slide damper and bracket assembly off studs.
    NOTE
     Brake master cylinder does not need to be moved to gain access to clutch master cylinder assembly.



    Click image to see an enlarged view
    Fig. Remove the ABS control assembly
  12. Remove the ABS control assembly.

    Click image to see an enlarged view
    Fig. Remove the clutch master cylinder pushrod retainer clip from clutch pedal pin and disconnect pushrod from pedal
  13. Remove the clutch master cylinder pushrod retainer clip from clutch pedal pin and disconnect pushrod from pedal.
  14. Turn the clutch master cylinder approximately eighth turn clockwise and remove from the dash.
  15. Remove the clutch master and actuator assembly from the vehicle.
To install:

NOTE
When installing a new unit, leave the clutch slave cylinder pushrod retainer in place when installing the unit. This will ensure the actuator rod is seated in the clutch release fork pocket as the actuator is installed.


NOTE
When installing an existing unit, a new clutch slave cylinder pushrod retainer should be installed on the end of the pushrod and the straps should be attached to the actuator.

  1. Install the clutch master cylinder into dash with reservoir leaning outboard. Turn approximately 1/8 turn counterclockwise to lock in position.
  2. On ABS equipped vehicles, place the brake master cylinder back on the booster studs and tighten brake master cylinder-to-booster nuts. Tighten the brake master cylinder-to-brake booster nuts to 20 ft. lbs. (27 Nm ).
  3. Slide the damper and bracket onto clutch housing damper studs and install the nuts, and tighten the clutch hydraulic damper bracket-to-case studs to 18 ft. lbs. (25 Nm ).
  4. Install actuator into clutch housing with hydraulic line facing down and rotate actuator quarter turn clockwise while pushing toward housing.
  5. Add dielectric (silicone) grease to clutch pedal pin then connect pushrod and install pushrod retainer clip to clutch pedal pin.
    NOTE
    ABS system must be bled.
  6. Install ABS control assembly.
  7. Install the battery tray and bolts. One bolt in fender well at location, and tighten the battery tray-to-frame rail bolts to 89 inch lbs.(10 Nm )
  8. Install the PCM and PCM attachment bolts, and tighten the PCM-to-battery tray bolts to 53 inch lbs.(6 Nm )
  9. Reconnect the PCM J2 (black 28 way) harness connector and secure locking device.
  10. Make sure the battery tray is clean.
  11. Make sure that the battery cable ends are clean and free of corrosion. (Clean with a wire brush.)
  12. Make sure that the battery is in food physical condition (e.g., no cracks, or obvious damage) and that the terminals are clean.
  13. Install the battery carefully in the battery tray; make sure that the terminals do not short against any metal during the installation.
  14. Install the battery hold-down retainer, locking the battery into the tray. Install and tighten the hold-down retainer nut and screws, and tighten the battery hold down-to-battery tray fasteners to 80 inch lbs.(9 Nm ).
    NOTE
    Attach the positive then negative terminal.
  15. Install the positive battery cable first, and tighten the battery terminal bolts to 13 ft. lbs. (17 Nm ).
    NOTE
    Attach positive then negative terminal.
  16. Install the air cleaner and duct assembly, and tighten the air box attachment bolts to 89 inch lbs.(10 Nm ).
  1. Remove the clutch pedal retainer from the front of the clutch pedal assembly.
  2. Pull the clutch pedal upward in order to disengage the clutch master cylinder pushrod from the clutch pedal.
  3. Remove the Underhood Electrical Center (UBEC).
  4. Place a shop towel under the clutch master cylinder in order to catch any fluid loss.

    Click image to see an enlarged view
    Fig. Disconnect the clutch damper from the clutch master cylinder
  5. Disconnect the clutch damper from the clutch master cylinder.

    Click image to see an enlarged view
    Fig. Disconnect the reservoir line from clutch master cylinder
  6. Disconnect the reservoir line from clutch master cylinder.
  7. Cap the reservoir and hydraulic lines in order to prevent fluid loss and contamination.

    Click image to see an enlarged view
    Fig. Rotate the clutch master cylinder one quarter turn clockwise and remove the cylinder from the vehicle
  8. Rotate the clutch master cylinder one quarter turn clockwise and remove the cylinder from the vehicle.
To install:

NOTE
While installing, ensure that the clutch master cylinder pushrod is aligned with he clutch pedal.

  1. Install the clutch master cylinder while rotating quarter turn counterclockwise.
  2. Uncap the reservoir and hydraulic lines.
  3. Connect the clutch damper to the clutch master cylinder.
  4. Install the reservoir line in the clutch master cylinder.
  5. Remove the shop towel and discard in a suitable container.
  6. Install the UBEC.
  7. Connect the clutch master cylinder pushrod to the clutch pedal.
  8. Install the clutch pedal retainer.
  9. Bleed the clutch hydraulic system.
  1. Remove the clutch pedal retainer from the front of the clutch pedal assembly.
  2. Pull the clutch pedal upward in order to disengage the clutch master cylinder pushrod from the clutch pedal.
  3. Remove the Under right hand hood Electrical Center (UBEC).
  4. Place a shop towel under the clutch master cylinder in order to catch any fluid loss.

    Click image to see an enlarged view
    Fig. Disconnect the clutch damper from the clutch master cylinder
  5. Disconnect the clutch damper from the clutch master cylinder.

    Click image to see an enlarged view
    Fig. Disconnect the reservoir line from clutch master cylinder
  6. Disconnect the reservoir line from clutch master cylinder.
  7. Cap the reservoir and hydraulic lines in order to prevent fluid loss and contamination.

    Click image to see an enlarged view
    Fig. Rotate the clutch master cylinder one quarter turn clockwise and remove the cylinder from the vehicle
  8. Rotate the clutch master cylinder one quarter turn clockwise and remove the cylinder from the vehicle.
To install:

NOTE
While installing, ensure that the clutch master cylinder pushrod is aligned with he clutch pedal.

  1. Install the clutch master cylinder while rotating quarter turn counterclockwise.
  2. Uncap the reservoir and hydraulic lines.
  3. Connect the clutch damper to the clutch master cylinder.
  4. Install the reservoir line in the clutch master cylinder.
  5. Remove the shop towel and discard in a suitable container.
  6. Install the UBEC.
  7. Connect the clutch master cylinder pushrod to the clutch pedal.
  8. Install the clutch pedal retainer.
  9. Bleed the clutch hydraulic system.

------------
THANK YOU.
-------------



For more car related problem troubleshooting:---

This are the sections, you can go through and click the link to read its troubleshooting.

---------

The car will not start?

-----------------

Car will not crank?


-----------

Car has no spark?


-------------

How to troubleshoot car battery?

-----------------

How to test starter solenoid?

http://schematicsdiagram.blogspot.com/2011/06/how-to-test-starter-solenoid.html

--------------------

How to test cars starter?

http://schematicsdiagram.blogspot.com/2011/06/how-to-test-cars-starter.html

How to replace starter in car?



-----------

car will turn over but will not start?



-----------------

The Brake Indicator Light Stays On dash of car?

The ABS and Traction Control Lights stays ON dash of car?


Check Engine Light On car?

 -------------------------

How to replace Interior Lights on car?

Car lights not working, even after replacing the bulb/lamp?

Click this link below:--
 ---------------

How to replace head lights on car?

--------------------

How to replace Parking, turn, and Brake Lights on car?

How to replace power window motor in car?

How to test relays on car?

 -----------------------------

How to troubleshoot Engine Misfires?

------------

The spark plug firing order for car?

------------------------

Where is the Thermostat located in car?

How to recharge AC on Auto/Truck/car?

-------------------
How to trouble shoot speedometer?
To Order car parts online:--To get heavy discount on car parts .Click this link below:----

How to Replace Coil Springs?

How to Replace an Oil Pan Gasket?


How to Replace a Fuel Injector


How to Replace a C.O.P. Type Ignition Coil?

How to Replace a Fuel Pressure Regulator?

How to Replace a Fuel Pump?

How to Replace a Rear Lift Gate Locking Mechanism?


How to Clean a Fuel System

How to Replace an Ignition Coil


How to Replace a Windshield



How to Replace a Mass Air Flow Sensor


How to Replace a Rear Distance Sensor

How to Replace a Muffler


How to Replace an Engine


How to Replace an Intake Manifold Gasket



How to Replace an Oil Pump


How to Lubricate a Brake Pedal Linkage ?

How to Replace a Windshield Wiper Motor



How to Replace a Distributor Cap


How to Replace a Door Weather Stripping


How to Replace a Freeze Plug


How to Replace a Head Gasket

How to Replace a Heater Core

How to Replace Spark Plugs?


How to Replace a Rear Axle Bearing?

How to Replace a Front Bumper Cover



How to Replace a Manual Transmission



How to Replace a Headlight Bulb



How to Replace a Headlight Switch



How to Replace Windshield Wiper Blades


How to Replace a Cooling Fan


How to Replace a Catalytic Converter


How to Replace an Engine Mount



How to Replace a Fog Light Assembly



How to Change Engine Oil and Filter



How to Replace a Power Seat Switch


How to Replace a Rear Main Seal


How to Repair a Defroster Grid



How to Replace an AWD Transfer Case


How to Replace a Plastic License Plate Bracket?

How to Replace a Power Seat Motor


How to Replace Power Steering Fluid


How to Replace a Power Window Switch



How to Replace a Quarter Glass Panel?


How to Pressure Test a Radiator and Cap


How to Replace a Radiator


How to Repair a Hood.

How to Replace an Energy Absorber


How to Replace Heater Core Hoses


How to Replace a Thermostat.


How to Rotate Tires.

How to Replace Wheel Lug Nuts


How to Replace a Tire Valve Stem



How to Change a Flat Tire



How to Replace Leaf Springs


How to Replace a Heater Control Valve


How to Replace Transmission Cooler Lines


How to Replace an Ignition Control Unit


How to Replace a Brake Hose


How to Replace a Transfer Case Rear Output Seal


How to Replace a Seat Belt and Seatbelt Retractor


How to Replace a Power Steering Rack


How to Bleed Brakes with a Tool


How to Replace a Tail Light Bulb


How to Check Automatic Transmission Fluid Level



How to Change Automatic Transmission Fluid and Filter


How to Replace Vacuum Hoses



How to Replace an Air Intake Boot



How to Replace a Valve Cover Gasket


How to Replace a Water Pump


How to Replace a Windshield Wiper Switch



How to Replace Window Run Channel Seals


How to Replace a Window Regulator



How to Balance a Tire and Wheel




How to Replace a Window Motor


How to Adjust a Hood Release Latch?


How to Replace a Radiator Support


How to Replace a Rear Pinion Seal.


How to Replace Battery Cables




How to Replace a Proportioning Valve



How to Replace an Upper Radiator Hose



How to Replace a Lower Radiator Hose


How to Replace a Timing Belt?

How to Check for Loose or Worn Suspension 



How to Check for Loose Steering System

How to Replace an Oil Pressure Switch (Sensor)


How to Replace a Fender Liner or Splash Shield



How to Replace a Hood Insulator


How to Replace a Rear Differential.

How to Repair a Hood Hinge


How to Replace a Brake Pedal Return Spring



How to Replace a Door Shell.

How to Replace a Transfer Case Front Output Seal


How to Replace a Hood Latch/Lock Assembly


How to Replace a Lift Gate Strut

How to Replace Mud Flaps (Mud Guards)



How to Check Differential Oil Leaks and Replace Oil.


How to Replace a Mirror

How to Replace a Transfer Case Shift Linkage



How to Replace a Transmission Mount



How to Replace a U-Joint


How to Replace a Washer Tank


How to Replace an A/C Line or Hose


How to Replace a Heater and A/C Blower Motor


How to Replace an ABS Control Unit



How to Perform a Brake Adjustment




How to Replace an Alternator Belt




How to Replace an Emblem


How to Replace an Exhaust Manifold Gasket


How to Replace a Tail Pipe


How to Replace Shock Absorbers


How to Replace a Strut Assembly



How to Replace a Driveshaft



How to Replace a Wheel Cylinder


How to Replace a Hood


How to Replace a Brake Disc (Rotor)


How to Replace a Metal License Plate Bracket



How to Replace a Power Steering Pump


How to Perform a Basic Engine Tune-Up


How to Perform a Basic Engine Tune Up-Oil Change



How to Perform a Basic Engine Tune Up-Spark Plug and Wire Change

How to Replace a Distributor Cap and Rotor ?



How to Repair a Valance


How to Replace a Turn Signal Switch


How to Replace a Plastic Bumper Cover


How to Replace a Parking Brake Cable


How to Replace Windshield Wiper Blade Refills



How to Replace a Corner Light


How to Replace a Bumper Bracket or Side Support


How to Replace a Washer Pump.

How to Replace a Grille


How to Replace a Locking Hub


How to Replace a Fender


How to Replace a Power Steering Hose


How to Replace a Tailgate


How to Replace a Soft Top


How to Replace a Carburetor

­

How to Replace a Bumper Trim



How to Replace Trunk Strut


How to Replace a Front End Cover


How to Replace a Front Pipe


How to Replace an Antenna Mast


How to Replace a Side Marker Light Assembly


How to Install a Carpet on car?

How to Replace a Spoiler


How to Replace a Mirror Glass on car?



How to Replace a Step Bumper?


How to Replace a Door Lock


How to Replace a Throttle Body


How to Replace a Throttle Position Sensor


How to Replace a Grille Insert


How to Replace a Fan Shroud Assembly



How to Replace an Engine Splash Shield



How to Replace a Turn Signal Light Assembly


How to Replace a Headlight Assembly


How to Replace a Park Light Assembly

How to Replace an Expansion Tank



How to Replace an Exhaust System


How to Replace a Fender Trim


How to Replace a Headlight Door


How to Replace a Fan Shroud


How to Replace a Harmonic Balancer


How to Replace a Header Panel


How to Replace a Fuel Tank


How to Replace a Fuel Tank Cap


How to Replace a Distributor


How to Replace an EGR Valve


How to Replace an Oxygen Sensor


How to Replace an Ignition Wire Set


How to Replace a Tail Light


How to Replace a Door Handle


How to Replace a Hood Strut


How to Replace Tail Light Assembly


How to Replace a Front Bumper


How to Replace a Fuel Pump Assembly


How to Replace an Axle Assembly


How to Replace a Tailgate Handle


How to Replace a Wheel Hub Assembly


How to Replace a Control Arm


How to Replace a Window Regulator with Motor


How to Replace a Headlight



How to Check the Brake Fluid Level

How to Replace a Parking Brake Switch


How to Replace a Blower Motor Resistor


How to replace frost plug on car?

Horn stopped working?


How to clean egr valve on Isuzu Amigo?


Cruise control stopped working?

Car is stuck in park and the shift will not move?

How to change the outer door weather strip?


Car slows down when it gets hotter?


Warning lights on and speedometer died?



Car won't rev past 1900 rpms?