Saturday, October 22, 2011

Where is knock sensor located on 2005 dodge ram?

The 2005 Dodge Ram truck has two knock sensors mounted to the engine block under the intake manifold.
To replace the sensors the intake manifold needs to be removed.Then only you can access the knock sensors. Each sensor has a single bolt that holds it down. When going back together the torque on these is critical. Over or under tightening them will cause problems with spark timing. The torque on the bolt is 15 ft lbs or 176 in lbs.

--------


For more car related problem troubleshooting:---

This are the sections, you can go through and click the link to read its troubleshooting.

---------

The car will not start?

-----------------

Car will not crank?


-----------

Car has no spark?


-------------

How to troubleshoot car battery?

-----------------

How to test starter solenoid?

http://schematicsdiagram.blogspot.com/2011/06/how-to-test-starter-solenoid.html

--------------------

How to test cars starter?

http://schematicsdiagram.blogspot.com/2011/06/how-to-test-cars-starter.html

How to replace starter in car?

http://schematicsdiagram.blogspot.com/2011/06/how-to-replace-starter-in-car.html