Tuesday, February 7, 2012

How to replace ignition coil for Toyota rav4?

Along the backside of th intake, there are 2 metal brackets with12mm bolts that hold the backside of the intake, one is on the driver side behind th throttle body area, the other is on the passenger side and goes over ignition coil #1. Remove these bracket bolts. The throttle body and the bolts in the front of th manifold that hold it to the lower intake manifold and you will be able to lift the intake up and out. Do note that the throttle body and intake manifold gaskets are supposed to be replaced here also.
Once the intake manifold is out,you can easily replace Ignition coils.

This will help.
Thanks.

See below latest related solved problem:---
How to remove ignition switch on VW Car models?
How to replace Ignition Lock Cylinder on Acura Car Models?

How to replace Ignition Switch on Acura Car Models?

How to test and replace Ignition coil on Audi A4 Car models?

How to test and replace Ignition Control Unit on Audi A4 Car models?

How to test and replace Ignition Coil Pack on Audi A4 Car models?

How to Replace a C.O.P. Type Ignition Coil?

How to Replace an Ignition Coil

How to Replace an Ignition Control Unit

How to Replace an Ignition Wire Set

How to Replace Ignition Switch on Chevrolet Caprice Classic?

How to Test Ignition Coil?


Engine not getting spark from distributor?

Cost to replace ignition coil?

Ignition locked up on Mercury Villager?


max