Monday, March 5, 2012

Acura Fuel Rail & Injectors replacing?

The details are as follows :---



Removal & Installation


Before servicing the vehicle, refer to the precautions section.
Relieve the fuel system pressure.
Remove or disconnect the following:

Negative battery cable
Intake manifold
Fuel lines
Fuel injector connectors
Fuel pressure regulator vacuum line
Fuel supply manifold

Separate the fuel injectors from the fuel supply manifold.

To install:

Install the fuel injectors to the fuel supply manifold with new cushion rings and O-rings. Coat the injectors with clean engine oil prior to removal.
Install new seal rings to the intake manifold.
Install or connect the following:

Fuel supply manifold and injector assembly. Tighten the bolts to 86 inch lbs. (10 Nm).
Fuel pressure regulator vacuum line
Fuel injector connectors
Fuel lines
Intake manifold
Negative battery cable

Start the engine and check for leaks.


This will help.
For more help go to


Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html


max