Friday, March 30, 2012

Replace Steering Wheel on Toyota Sienna?

The procedure to replace Toyota Sienna Steering wheel.
The details and diagrams to remove and install steering wheel.
All is mentioned here as follows:---


These models are equipped with a Supplemental Restraint System (SRS), which uses an air bag. Whenever working near any of the SRS components, such as the impact sensors, the air bag module, steering column and instrument panel, disable the SRS.

  1. Before servicing the vehicle, refer to the precautions section.
  2. Disconnect the negative battery cable and wait AT LEAST 90 seconds before beginning the procedure.
  3. Align the front wheels straight ahead position.
    NOTE
    Unplugging the air bag connector with the ignition switch in the On or ACC position will result in a DTC being recorded.
  4. Using a Torx® socket, loosen the 2 Torx® screws until the groove along the screw catches on the screw case.
  5. Pull the wheel pad from the steering wheel and disconnect the airbag connector. Store the wheel pad with the upper surface facing upwards. Do not disassemble the wheel pad. 
    NOTE
    Be careful not to pull on the air bag wiring harness when removing the wheel pad.



    image
    Fig. Using a Torx® socket, loosen the 2 Torx® screws until the groove along the screw catches on the screw case-2000-03 Sienna
  6. Disconnect the electrical connector.
  7. Remove the steering wheel nut.
  8. Make match marks on the steering wheel and shaft.
  9. Install a suitable puller and remove the steering wheel.

    Click image to see an enlarged view
    Fig. Make match marks on the steering wheel and shaft and use a puller to remove the steering wheel-2000-03 Sienna
  1. NOTE
    Be careful not to pull on the air bag wiring harness when removing the wheel pad.



    Click image to see an enlarged view
    Fig. Exploded view of the steering wheel assembly components-2004-06 Sienna


    Click image to see an enlarged view
    Fig. Using a Torx® socket, loosen the 2 Torx® screws until the groove along the screw catches on the screw case-2004-06 Sienna
  2. Click image to see an enlarged view
    Fig. Make match marks on the steering wheel and shaft and use a puller to remove the steering wheel-2004-06 Sienna

These details will help.
Thanks.

FOR MORE HELP GO TO: ---

Car repair guide?

http://technoanswers.blogspot.in/2012/03/car-repair-guide.html


max